Press "Enter" to skip to content

Start Searching the Answers

The Internet has many places to ask questions about anything imaginable and find past answers on almost everything.

How far should excavated materials or equipment be kept from the edge of the excavation site to prevent it from rolling or falling into excavations?

2 feet

Where should excavated materials be stored?

The precautions to be taken are: Excavated spoil, plant or materials should not be stored close to the sides of excavations as loose material can fall in. The extra loading can make the sides of the excavation more likely to collapse.

What are some dangers of excavations quizlet?

The dangers of excavations come from the possibility of cave-ins, in addition to the possibility of the lack of oxygen (asphyxiation), fire, accidental break of underground utility lines (such as gas, electricity), collapse due to moving machinery near the edge of the excavations, inhalation of toxic materials, and …

What is the minimum distance from the edge of a trench in which vehicles and people are allowed to work?

2 feet (0.61 meters) from trench edges. Keep heavy equipment away from trench edges.

How deep should a trench be before shoring?

Trenches 5 feet (1.5 meters) deep or greater require a protective system unless the excavation is made entirely in stable rock. If less than 5 feet deep, a competent person may determine that a protective system is not required.

What is the first step in excavation?

Step 1: Context – Create a grid on the surface area of the site using a ruler, string, and stakes (to anchor string). Step 2: Dig – Be careful not to damage anything that is uncovered. At this time do not remove any artifacts or eco-facts. Begin by carefully brushing away soil from items.

What is the next step after excavation?

After excavation, layout the foundation and backfill the remaining excavated area around foundation with soil. Floor levels of residential buildings are higher than the natural ground level. Fill the area with soil up to floor levels and compact the soil. Now earth work of residential building is finished.

How do you make an excavation plan?

An Excavation and Trenching Plan should include the following elements:

  1. A hazard assessment.
  2. Identification and credentials of competent person.
  3. Diagram or sketch of the area where the work is to be done, with adjacent and nearby structures shown.
  4. Projected depth of the excavation.

What is a shoring plan?

Shoring is the process of temporarily supporting a building, vessel, structure, or trench with shores (props) when in danger of collapse or during repairs or alterations. Shoring comes from shore, a timber or metal prop.

What kinds of questions that must be answered before excavation starts?

Explanation: One question that must be answered is how much of the site will be excavated. Another question is what kinds of material will be collected – soil, charcoal, animals bones, or fibers.

How long does a foundation need to cure?

Seven to 28 days

What is enclosing the structure of a house?

Sheathing. The soffit is installed to enclose the underside of the overhang. Sheathing is the covering all of the exterior surfaces. Plywood, fiberboard, or rigid foam sheets are used to sheath the walls.

What makes a tall structure stable?

For a skyscraper to be stable, it must be built on a strong foundation. The part of the building that’s found below the ground is called the substructure. It supports the entire skyscraper and keeps it standing tall and strong.

Which house is a strong house?

Strong House or Strong Hall may refer to a fortified house, or to houses named after owners called “Strong”, including the following: Strong House (Coventry, Connecticut), listed on the National Register of Historic Places (NRHP)

What kind of house is not strong?

Kutcha houses are made using wood, mud, straw, and dry leaves. As a result kutcha houses are not very strong and are called as temporary houses. Examples: Huts in villages.

How do you know which house is strong in astrology?

Strength of a house in a horoscope An influence on the house should be seen from drishti or occupation of the house by other planets. Beneficial influence comes from occupation or full aspect of planets like Jupiter, Venus, Moon and planets in exaltation.

Which Lagna is most powerful?

Udaya lagna – The Most Effective Point.

What planets are weak in birth chart?

The most powerful remedy for Debilitated (weak) Planets in your birth chart. Planets become weak and debilitated and lose the power to provide auspicious results in certain signs. Sun is the weakest in Libra, Moon in Scorpio, Mars in Cancer, Mercury in Pisces, Jupiter in Capricorn, Venus in Virgo and Saturn in Aries.

In which house Mars is bad?

According to the prevalent understanding of mangal dosha, the placement of Mars can create havoc if placed in the following houses – 12th, 1st, 4th, 7th and 8th. According to South Indian system of astrology mangal dosha extends to two more houses 2nd and 5th. Mangal dosha is calculated from lagna, Moon and Venus.

How do you know which planets are weak in Kundli?

Steps to finding Weak Planet in Astrology :- 4> If that planet is also placed in marana karka sthan . 5> If that planet has low shad bala strength in birth chart. 6> If that planet is also placed in a low ashtakavarga score house specially that house ashtakavarga score is less than 28 points .

What is the rarest aspect in astrology?

One of the rarest, that doesn’t appear often in a natal chart, is a planet “cazimi” the Sun. That is, the planet is within 00.15′ of the Sun’s position. Some say within 00.17′.